• Blixt&Dunder - precis som det låter
  • Undrar du något? Prova chatten!
Exkl. moms Inkl. moms

Logga in

S&S Camshaft 450S Cam 450 70-77 Bt i gruppen Reservdelar & Tillbehör / Motordelar  / Motordelar Shovelhead / Bottendel Shovel / Kam/Delar Shovelhead hos Blixt&Dunder AB (09250417)
S&S Camshaft 450S Cam 450 70-77 Bt

S&S Camshaft 450S Cam 450 70-77 Bt

S&S
Betyg på S&S Camshaft 450S Cam 450 70-77 Bt i gruppen Reservdelar & Tillbehör / Motordelar  / Motordelar Shovelhead / Bottendel Shovel / Kam/Delar Shovelhead hos Blixt&Dunder AB
3360 kr
 
Köp trots längre leveranstid
Artikelnummer: 09250417
Leveranstid:


"450S Cam

  • S&S cams are tested on the dyno, street and racetrack before being offered to the public
  • With hundreds of test hours on them, you know that you are getting the best cam S&S can produce
  • Good low and mid-range torque
  • Bolt-in cam for lower compression motors with compression up to 8.5:1
  • Recommend solid lifters
  • Made in the U.S.A.
  • Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case clearance.




  • Exhaust Lift at TDC: 0,145 inch
    Intake Lift Imperial: 0.475 inch
    Intake Duration: 236°
    Intake Lift at TDC Imperial: 0.151 inch
    Exhaust Open: 40°
    Exhaust Lift Imperial: 0.475 inch
    Product Name: Cam
    Exhaust Lift at TDC Imperial: 0.145 inch
    Units: Each
    Intake Close: 38°
    Exhaust Close: 18°
    Exhaust Lift: 0,475 inch
    Grind: 450 Series
    Intake Lift: 0,475 inch
    Intake Lift at TDC: 0,151 inch
    Intake Open: 18°
    Application: Exhaust| Intake
    Exhaust Duration: 238°
    "

    Enhet: Styck
    Produkt-typ: Cam
    Tillverkarens Art. Nr.: 33-5063
    "450S Cam

  • S&S cams are tested on the dyno, street and racetrack before being offered to the public
  • With hundreds of test hours on them, you know that you are getting the best cam S&S can produce
  • Good low and mid-range torque
  • Bolt-in cam for lower compression motors with compression up to 8.5:1
  • Recommend solid lifters
  • Made in the U.S.A.
  • Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case clearance.




  • Exhaust Lift at TDC: 0,145 inch
    Intake Lift Imperial: 0.475 inch
    Intake Duration: 236°
    Intake Lift at TDC Imperial: 0.151 inch
    Exhaust Open: 40°
    Exhaust Lift Imperial: 0.475 inch
    Product Name: Cam
    Exhaust Lift at TDC Imperial: 0.145 inch
    Units: Each
    Intake Close: 38°
    Exhaust Close: 18°
    Exhaust Lift: 0,475 inch
    Grind: 450 Series
    Intake Lift: 0,475 inch
    Intake Lift at TDC: 0,151 inch
    Intake Open: 18°
    Application: Exhaust| Intake
    Exhaust Duration: 238°
    "

    Kundomdömen