• Blixt&Dunder - precis som det låter
  • Undrar du något? Prova chatten!
Exkl. moms Inkl. moms

Logga in

Andrews Camshaft Set 55Hg Gear-Driven Cams 55Hg 06Dyna 07-17Tc i gruppen Reservdelar & Tillbehör / Motordelar  / Motordelar Twin Cam / Bottendel Twin Cam / Kam/Delar Twin Cam hos Blixt&Dunder AB (09250175)
Andrews Camshaft Set 55Hg Gear-Driven Cams 55Hg 06Dyna 07-17Tc

Andrews Camshaft Set 55Hg Gear-Driven Cams 55Hg 06Dyna 07-17Tc

Andrews
Betyg på Andrews Camshaft Set 55Hg Gear-Driven Cams 55Hg 06Dyna 07-17Tc i gruppen Reservdelar & Tillbehör / Motordelar  / Motordelar Twin Cam / Bottendel Twin Cam / Kam/Delar Twin Cam hos Blixt&Dunder AB
6110 kr
 
Köp trots längre leveranstid
Artikelnummer: 09250175
Leveranstid:


"Grind Cam

  • Cams work well with fuel injection or carburetor models
  • Run best with low restriction exhausts (1700-5200 rpm)
  • Works well with carbs or fuel injection
  • Bolt-in cam for more torque with stock compression
  • Can be used with stock valve springs and tappets
  • Similar to the EV-23 cam
  • All Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications, 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications).
  • Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
  • 59G, 60G and 64G cams are for highly tuned engines and require the knowledge of an expert engine builder for proper setup and installation.


  • Cams for maximum torque and horsepower at higher RPM ranges (2600-6000+ RPM)

    Enhet: Par
    Produkt-typ: Cam Kit
    Tillverkarens Art. Nr.: 216355G
    "Grind Cam

  • Cams work well with fuel injection or carburetor models
  • Run best with low restriction exhausts (1700-5200 rpm)
  • Works well with carbs or fuel injection
  • Bolt-in cam for more torque with stock compression
  • Can be used with stock valve springs and tappets
  • Similar to the EV-23 cam
  • All Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications, 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications).
  • Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
  • 59G, 60G and 64G cams are for highly tuned engines and require the knowledge of an expert engine builder for proper setup and installation.


  • Cams for maximum torque and horsepower at higher RPM ranges (2600-6000+ RPM)

    Kundomdömen

    Se fler varor